1420

高压特氟龙管

2017/12/26



       不锈钢AISI304编织层的PTFE软管通常用于高压下低温煤气输送。对些设备很重要的是PTFE软管不仅耐很高的温度和压力,同时也有良好的耐渗透性。我司为此发明了一种特殊的生产加工工艺以保证它的最大耐渗透性。实践温度-54℃~+204℃之间,爆破压力依不同的直径可高达1095bar,为避免对使用者造成可能的意外,我们建议为这种软管提供安全达标不锈钢钢丝绳。

The use of the PTFE flexible hoses braided INOX STEEL AISI304 is always more requested for the transport of the cryogenig gas at high pressures.For these applications is essential that the PTFE hoses not only resist to extreme temperatures and pressures, but also that they have a very good resistance to the permeation.  UniGasket to this aim has developed a special manufcture proceeding thatguarantee to its hoses the maximum resistance to the permeation. The exercise temperatures are between  -54℃~+204℃ and the burst pressures are guaranteed till 1100 bar according to the different diameters. Considering the high exercise pressures,to avoid possible accidents to users, Werecommend to provide the hoses with the safely inox steel cable.


Core:Polytetrafluorethylene(PTFE)     
内胶层:聚四氟乙烯(PTFE)
reinforcement:2 Spirals of high-tensile steel wire,1braid of G.I steel wire
加强层:2层高强度钢丝缠绕,1层G.I钢丝编织
TEMPERATURE RANGE:-70℃ TO +200℃.
温度范围:-70℃~+200℃

       有不锈钢AISI304编织层的PTFE软管通常用于高压下低温煤气输送。对些设备很重要的是PTFE软管不仅耐很高的温度和压力,同时也有良好的耐渗透性。我司为此发明了一种特殊的生产加工工艺以保证它的最大耐渗透性。实践温度-70℃~+260℃之间,爆破压力依不同的直径可高达1100bar,为避免对使用者造成可能的意外,我们建议为这种软管提供安全达标不锈钢钢丝绳。

The use of the PTFE flexible hoses braided INOX STEEL AISI304 is always more requested for the transport of the cryogenig gas at high pressures.For these applications is essential that the PTFE hoses not only resist to extreme temperatures and pressures, but also that they have a very good resistance to the permeation.  UniGasket to this aim has developed a special manufcture proceeding thatguarantee to its hoses the maximum resistance to the permeation. The exercise temperatures are between  -70℃~+260℃ and the burst pressures are guaranteed till 1100 bar according to the different diameters. Considering the high exercise pressures,to avoid possible accidents to users, Werecommend to provide the hoses with the safely inox steel cable. 


CONSTRUCTION

LINER = PTFE according to"ISO 12086, Part 1 PTFE-EPDM1,6.1.CE.4.1.2"

1st PLY BRAID = HIGH PERFORMANCE POLYARAMID YARN

2nd PLY BRAID = HIGH PERFORMANCE POLYARAMID YARN

3rd PLY BRAID = AISI304S15 HARD DRAWN STAINLESS STEEL WIRE

TEMPERATURE RANGE:-60℃ TO +260℃.

Aramid yarn is the limiting material in the hose construction.

For any application above 150℃, contact your KA representative for working pressure and length of service duration.

Hose has been validation tested against SAE J517 according to 100 R14 hose range parameters.